*Please Note: Last collection time is 30 minutes before closing.
We are open
until 10pm!
We did it! Colin Stevens, founder and Managing Director of Better Bathrooms was crowned Entrepreneur of the Year at the prestigious National Business Awards 2012. A great night at a wonderful awards ceremony was capped off with this fantastic recognition.
Stylish Aqua waterfall basin mixer tap with ceramic disc technology at an unbeatable price
RRP £208.00 Our Price £82.95 Saving You £125.05
Contemporary Aqua waterfall bath filler with ceramic disc technology at an unbeatable price
RRP £310.00 Our Price £123.95 Saving You £186.05
Contemporary 5 tap hole Aqua waterfall bath shower mixer with ceramic disc technology at an...
RRP £360.00 Our Price £143.95 Saving You £216.05
Contemporary Aqua waterfall bath shower mixer with ceramic disc technology at an unbeatable price
RRP £335.00 Our Price £133.95 Saving You £201.05
Can I use cascade taps with the aspen 60 wall hung vanity unit?
By joanne On 2013-01-26 23:44:52
Hi there,
Yes, this combination would be compatible.
By Mike B On 2013-01-27 10:16:20
Hi, Could you advise if the Fitting size is three quarter inch bsp?
By Sarah redrup On 2012-12-29 17:20:53
Hi there,
The hot and cold water inlets are 22mm.
By Lee On 2012-12-30 10:55:03
Hello
can this be wall mounted, will the filler be long enough to reach in the bath?
By mark On 2012-10-26 11:55:13
Hello
Unfortunately this item can not be wall mounted, it can only be mounted on the side of the Bath.
By Mike B On 2012-10-26 13:08:25
How do you connect to the tap with hot and cold feed? Does it come with two 10mm screw in pipes
By David Hall On 2012-07-16 11:09:14
Hi there. Yes, the basin mixer comes with both the hot and cold flexi connection water pipes.
By Anthony On 2012-07-18 09:41:19
Can the valves and outlet be on different sides of the bath. Are the hoses long enough??
By Patrick On 2012-02-06 20:32:05
Hi there, The valves on this mixer tap would only be available as pictured and the hoses are a standard length of approximately 1.5m
By Mike B On 2012-02-06 20:33:39
i have a corner bath which has no tap holes. I had thought of buying a freestanding tap but have seen this product and like it. How would i fit this to the bath?
By cnellist On 2012-01-03 19:30:29
You need to drill 5 holes, this is standard for uk baths to be undrilled. all of our taps are suitable for UK specification baths.
By probertshaw On 2012-01-07 18:39:56
