1700 Mono Veneto Bathroom Suite with Taps

Single Ended Bath

• 1700mm x 700mm
• 395mm Total Depth
• 200 Litre Capacity
• Manufactured from 5mm Thick Acrylic
• Bath Panels NOT included - see matching items
• Suitable for tap hole drilling by your installer, bath comes as standard without tap holes.
• Comes complete with leg set supports for ease of installation.

This bath can also be purchased with a range of whirlpool, air spa and hydrotherapy options. Please see our Straight Whirlpools Baths category.

Toilet & Soft Close Seat

• Comes complete with a soft close wrap-over seat
• Stunning simplistic design to suit a wide range of basins including the matching Veneto Basin and Pedestal
• Manufactured from High Quality White Ceramic



Specifications



• Internal overflow
• 3/6 litre push button
• Height: 840mm
• Width: 360mm
• Depth/Projection: 710mm

Note:

The toilet connects to the waste pipe through the wall in the standard UK fashion. It can be connected through the floor (as an S trap) by the purchase of a waste connector which is available from most local DIY stores or plumbers merchants.

Basin & Pedestal Basin

• Manufactured from high quality ceramic
• Width: 580mm
• Depth: 450mm
• Height: 840mm
• Available 1 tap hole only
• Only available in white

Basin mixer tap

• Height: 135mm
• Body Width: 42mm
• Base Width: 48mm
• Projection: 115mm
• Lever action
• Ceramic disc technology
• Manufactured from solid brass with a chrome finish
• Minimum pressure 1.0 Bar (6.5 litres per minute flow rate)
• Maximum pressure 3.0 Bar (19.5 litres per minute flow rate)
• Does NOT include basin waste. Please see matching items
• Suitable for the following water systems:
  - Combination boilers
  - Pressurised systems
  - Pumped systems
  - Gravity fed systems (which may require a pump)
  - Subject to a minimum pressure of 1.0 bar

Bath filler tap

• Does NOT include bath waste. Please see matching items
• Lever action
• Ceramic disc technology
• Manufactured from solid brass with a chrome finish
• Minimum pressure 1.0 Bar (17.6 litres per minute flow rate)
• Maximum pressure 3.0 Bar (25.1 litres per minute flow rate)
• Suitable for the following water systems:
  - Combination boilers
  - Pressurised systems
  - Pumped systems
  - Gravity fed systems (which may require a pump)
  - Subject to a minimum pressure of 1.0 bar