Product Information
Larkin Thermostatic Bar Shower Valve
Summary
The Larkin Bar Shower Valve adds a sleek minimalistic touch to any shower. With a modern chrome finish, this valve will suit most of our shower sets to help you build your ideal suite. 
View This Product's Installation Instructions
Features
- Tap Type: Shower Valve
- Style: Modern
- Min Pressure & Flow Rate: 0.5 bar (flow rate of 7 litres)
- Max Pressure & Flow Rate: 3.0 bar (flow rate of 18.2 litres)
- Length: 257mm
- Weight: 1.2Kgs
- Outlet Position: Top
- Outlet Size: G 3/4"
- Inlet Size: G 3/4"
- BS or European Standards: EN1111
- Materials Specification: Solid brass
- Finish: Chrome
- Features: Thermostatic Cartridge
- Suitable for:
- Combination Boilers
- Pressurised Systems
- Pumped Systems
- Gravity Fed Systems (which may require a pump)
Item Code:
BeBa_10995
Please Note: All sizes are approximate and should be used for guidance only.
Question from Mark Robinson: Asked on 23/10/2016 Hi, can u confirm this isn't an eco shower or a low pressure shower valve please??
Answer from Colin Frain Hi,
Thank you for your question.
That is correct, this can take between 0.5 bar and 3.0 bar.
If you need any more info or would like to place an order, please contact me using the details below.
Kind Regards,
Colin Frain
Sales Advisor
Manchester Showroom
Telephone: 0161 667 6560
Visit: www.betterbathrooms.com
Question from Joanne martin : Asked on 22/08/2016 I bought a Larkin bar shower value with the rail kit and had this installed in April. For the last 6 weeks we hVe had no hot water to the shower, but all other water supply in the house fine.
I have now had a Plummer out twice At the cost of £25 he has checked the pressure, calibration, blockage however it is still not hot. I spoke to betterbathroom who said we need evidence that the pressure is correct as it is most likely the cartridge that has gone. The Plummer is not sure what this photograph might be of. He has checked the pressure and said that it is fine. I am in a position now where I am not willing to call out a Plummer again, my shower won't run hot and it looks like I am going to have to buy a new shower from somewhere that offers a proper fault guarantee. If there is anything you could advise me before I have to do this it would be much appreciated.
Thank you
Answer from Nathan McGregor Hello.
thank you for your question.
I am sorry to hear that you shower is not working correctly. I would recommend that you speak with our technical support team on 0161 667 6560.
Regards.
Question from Neil : Asked on 13/03/2016 Having trouble getting hot water through how does it work
Answer from Matt Clarke Hi,
Please call our aftersales team on 01925 544 861 option 2.
Regards
Question from LT: Asked on 26/12/2015 How does this item differ from the Ecobar 2 Bar Shower Valve?
Answer from Benjamin Linnert Good Morning,
Thank you for your question.
The ecobar can be run of a weaker pressure effectively while the larkin starts off at double the minimum pressure required.
If there are any further questions, or your looking for a certain delivery time. Please feel free to give me a call on 0161 667 6560 and ask for Ben.
Kind Regards.