Congratulations! Your promo code PROMOCODE will be automatically applied when you check out – enjoy.
Product Information
The quad & offset quad panel riser pack is specifically designed with a one piece panel for an uninterrupted finish. The circular base plates and feet allow the tray to be levelled quickly
and creates a full stress support across the tray.
This Panel Riser Pack consists of:
1 x Curved panel 550 radius
2 x Panel joining brackets
8 x Feet
6 x Panel upright brackets & Hook and Loops
8 x Circular base plates & adhesive pads
4 x Floor fixing brackets
Screws
Item Code:
BeBa_14123
Back to top
Question from Robert Sorrenti: Asked on 24/09/2020 Hi. Can this be used with a 1200 x 900 quadrant shower tray?
Answer from Usman . Hi Robert. Thank you for your question. You will require code - BeBa_14121 - This will work perfectly with your suggested shower tray. I hope this helps. Thanks, Usman.
Question from Steve: Asked on 22/09/2020 Can this be used on a 900 x 760 shower tray?
Answer from Usman . Hi. Thank you for your question. The code you will need is - BeBa_14121 - This kit is better suited to the tray which you have stated. Thank you, Usman.
Question from Lee Hart: Asked on 21/09/2020 What is the height of the cover panel?
Answer from Usman . Good afternoon. Thank you for your question. The panel height is 96mm. I hope this helps. Thanks, Usman.
Question from Jane: Asked on 26/10/2019 Can this be used on a 1000 x 800 shower tray?
Answer from Catherine . Hello,
This is for use on a quadrant shower tray. If your tray is quadrant it would be suitable for that size if it is rectangular you would be Panel Pack A which is BeBa_14121.
Thanks
Question from Sutha: Asked on 10/10/2019 can i use this in any 900 x 900 shower trays
Answer from Catherine . Hello,
Yes, it can be.
Thanks