Product Information
Valencia 1590 x 740 Luxury Freestanding Bath
Summary
This Valencia Double Ended free-standing bath is a spacious and sleek design. It is delivered without tap holes allowing more possibilities when deciding which tap(s) will compliment this stunning bath. 
View This Product's Installation Instructions
Features
- Freestanding Bath
- Length: 1590mm
- Width: 740mm
- Weight: 30kg
- Capacity: 178L
- Double Ended
- Manufactured from High Quality Acrylic
- Taps and Waste NOT Included
- Suitable for tap hole drilling by your installer, bath comes as standard without tap holes.
Item Code:
BeBa_12162
Back to top
Question from Michelle Perrott: Asked on 24/05/2018 Hi, what is the internal base dimensions of the bath as my husband has long legs. Thanks
Answer from Peter Hi,
the internal measurement's are
length : 158 cm
width : 60 cm
if you have anymore questions or want to place the order please send me a email with your contact number and I will
call you at your own convenience .
Nathan.dunstan@betterbathrooms.com
many thanks
Question from Laura Lewis-Gartry: Asked on 25/02/2018 Can you tell me what the internal measurements are please.
Answer from chris Hi,
Its 98cm by 42cm.
Question from Caroline Hicks: Asked on 15/01/2018 How does this Valencia bath differ from the one you sell on Ebay under the Aurora name? They look identical, size, photos etc? Thank you for your help, Mrs C Hicks
Answer from Peter HI,
please call 0333 777 4777 ask for the ebay team .
if you need anymore assistance or need to place a order then please send me a email and I will call you at your convenience.
Nathan.dunstan@betterbathrooms.com
many thanks
Question from Robert Allan: Asked on 12/12/2016 Hi, what are the internal measurement sizes (length and width) of this bath?
Answer from Simon Hi,
The internal dimensions for this bath at the longest point is 1450mm and at the widest point 660mm
Regards
Simon
Question from Mark Lynds: Asked on 10/11/2016 Any tips for connecting tap flexible connectors to the bath tabs. I have drilled holes in the bath for taps, but the gap is so tight between the inside and outside of the bath that I am struggling to get any purchase using a telescopic basin wrench- any suggestions?
Answer from chris thomas Hi,
Thank you for your question.
its hard to say without actually seeing the product i wouldnt want to give you the wrong info.
If you need any more info, delivery dates or would like to place an order, please contact me using the details below.
Kind Regards,
Chris Thomas
Manchester Showroom Sales Assistant
Better Bathrooms Manchester
Telephone: 0161 667 6560
Email: chris.thomas@betterbathrooms.com
Website: www.betterbathrooms.com
Question from Kathy: Asked on 17/04/2015 Could your give me the dimensions of the BOTTOM of this bath? I can see that the top dimensions are 1590 x 740, but what is the size of the part which sits on the ground?
thanks
Answer from Simon Kirby Hi thanks for your question,
The base of the bath is 1200mm x 580mm,
If you need anything else just give me a call on the sales line which is 0161 667 6560 and ask for Simon
Question from rob: Asked on 14/02/2015 is the bottom of the bath hollow to allow for waste pipe underneath?-we have a solid floor and currently a freestanding bath on legs-
Answer from Nathan McGregor Hello.
thank you for your questions.
The bath is on a legset so can be raised if needed.
If you have any more questions please call our sales team on 0161 667 6560.
Regards.
Question from Craig: Asked on 28/07/2014 Assuming taps holes were drilled into this bath would the water pipes coming from beneath the floor typically be directly under the bath (hence not be visible) or outside the bath (and be visible)?
Answer from Nathan McGregor Hello.
As this bath is twin skinned you would have your taps coming from the floor as normal.
I hope this information helps. If you require any further assistance please call me on 0844 484 7678 (Option 1).
Regards.
Question from Chas M: Asked on 15/06/2014 Is the pipework hidden within the walls of the bath when installing deck mounted taps?
Answer from Anthony Hi there,
Yes, the pipework is hidden inside the carcass of the bath.
Kind Regards
Question from Sarah Norman: Asked on 30/01/2014 We would need taps with a shower attachment to fit on to the side of this bath, in the video it doesn't show the holes for this.
Which taps would you recommend to look at
Answer from Peter Thank you for your question.
You can put taps on the side of the bath your fitter would have to drill the holes for this when you receive the bath.
If you put a bath shower mixer on the bath you will have to position the bath near a wall as the shower head attached has to be drilled in to the wall.
The style of taps would depend on the overall look you are going for so I would recommend looking inthe modern tap section on the website 90% of the ranges have a bath shower mixer option.
Question from Wesley: Asked on 17/05/2012 Hi,
We recently purchased a Valencia Freestanding Bath from your "Small Bath Range".
Does this bath have supporting legs? It appears to sit on the outer frame of the bath. Is this support sufficient?
Many thanks
Answer from Mike B Hi there,
The support for that Bath is sufficient enough, there is no leg set.
Question from Charles Oliver: Asked on 13/01/2012 What waste pipes or fitments do I need to order for this bath? What do I require?
Charles
Answer from Mike B Hi there,
With that item, you would have to purchase a bath waste, which is in the "customers also bought" section, along with a set of taps.
In regads to pipe work etc, that would be something supplied by the person installing the item, and somehing we don't supply