Question

what is the overall depth from back to front of cabin doors

By frances morris On 2012-01-02 13:15:07

Answer

Hi There, The Shower Cabin door is approx 1 meter.

By probertshaw On 2012-01-07 19:26:40

Question

CAN THIS SHOWER BE CONNECTED TO A COMBI BOILER SYSTEM

By keith mackley On 2012-01-05 17:16:02

Answer

As long as the pressure provides a mixed balance minimum pressure of 1.5. Bar then it can be fitted to a combi boiler.

By probertshaw On 2012-01-07 17:04:39

Question

are the panels either side of the shower included

By jason On 2012-02-07 11:25:13

Answer

Hi there, This is a complete shower enclosure unit. It comes with the tray, side panles, doors and the roof.

By Lee On 2012-02-07 13:08:01

Question

Can this unit stand alone? What is the background colour of this unit?

By a.j.mcdougall On 2012-02-12 03:42:53

Answer

Hi there. I can confirm this is a stand alone unit. Also, the back panels are a Green colour.

By Mike B On 2012-02-12 10:05:50

Question

Is an electrical supply required and if so what ampage ?

By peter boggis On 2012-02-19 14:04:59

Answer

No Power is required for this shower cabin.

By Kirk Thompson On 2012-02-19 15:36:53

Question

Please advise colour of back panels in unit . Are they made of coloured/frosted glass?

By WILLIAM MCNAIR On 2012-02-25 12:22:50

Answer

Hi there, The back panels are made of glass and are a light green in colour.

By Lee On 2012-02-25 15:44:03

Question

Please can you advise what the maximum load is that the acrylic tray can take?

By Liz On 2012-03-17 21:43:23

Answer

Hi there, This shower tray will support a maximum load of up to 160kgs (25 stone).

By Mike B On 2012-03-18 10:12:37

Question

Is this shower enclosure freestanding and do you have plumbing instructions that i can reference prior to purchasing?

By Matthew Heron On 2012-03-19 20:36:33

Answer

Hi there, The cabin will need to be installed in to a corner and attached to the wall. The plumbing is a hot and cold water feed that you would connect to 2 flexi connectors on the corner of the shower cabin.

By Lee On 2012-03-19 20:50:56

Question

Please could you tell me the width of the door opening?

By andrew dolphin On 2012-03-25 22:26:40

Answer

Hi there, The opening is approximately 49cm.

By Mike B On 2012-03-26 08:27:40

Question

1) what is the height of the door opening 2) How high the the upstand and what is it made from 3)what are the selections avaialble for showering?

By Peter James On 2012-04-02 13:28:36

Answer

hi there the hight of the door opening is 1850 mm there is not an upstand on this enclosure the shower has 6 vertical shower jets, it works of a 1.5 bar pressure, it has seperate flow and temperature controll and also has an anti scold system.

By Sam Shepherd On 2012-04-02 17:10:02

Question

CAN YOU PLEASE CONFIRM MEASUREMENT FROM REAR BACK PANEL WHERE JETS ERE TO FRONT CENTRE OPENING OF DOORS

By T Cartlidge On 2012-04-11 08:55:21

Answer

Hi there, The measurement you require is approximately 780mm.

By Anthony On 2012-04-11 09:23:09

Question

8254 Hi I was wondering if I would need to put this on a plinth for the waste pipe etc? Many thanks

By Kelly griffin On 2012-05-21 11:25:23

Answer

Hi there, It would depend on the height you would need to raise the tray to. The enclosure is risen and there is approximately 100mm of space under the tray for you to possibly connect your waste pipe.

By Anthony On 2012-05-21 11:32:22

Question

Can you advise if this shower is suitable for a combi boiler? Will the presure be sufficient? Thanks

By iain massey On 2012-05-29 17:51:35

Answer

Hi there, This shower is suitable for a combi boiler, the min pressure needed is 1.5 bar.

By Lee On 2012-05-29 20:18:56

Question

Can you clarify if the shower jets, overhead shower and hanheld shower in this shower cabin can all be independently turned off or does the whole lot come on at once? Also I assume I am right that there is nothing electrical on this unit?

By Darren On 2012-09-09 20:09:28

Answer

Hi there,

 

Yes there are 3 diversion controls for the jets, overhead and shower hose. There is no electrical connection required.

By Anthony On 2012-09-10 08:13:12

Question

Does this system work with combi boiler system. promax combi he plus.

By william primrose On 2012-10-13 17:26:13

Answer

Hi there

Yes, this item would work with a Combi Boiler, so long as there is a minimum pressure of 1.5 Bar

By Mike B On 2012-10-14 09:56:00

Question

Hello

what clearance do I need to install the roof

By Lynn On 2012-10-28 21:34:39

Answer

Hello

The height is 2110 to the top of the unit.I would sugest 2400 would be sufficient.

By John Smith On 2012-10-29 14:43:54

Question

Hello

I am looking for a shower cabin like the model shown, however is this available in 800x800 size ? or a simular style.

By Andrew womack On 2012-10-30 11:31:53

Answer

Hello

We do not have this particular size in a shower cabin I am afraid, only in the standard quadrant enclosures.

By Anthony On 2012-10-30 19:53:01

Question

Hello

Do I need to seal shower and can I connect extractor fan?

By ian wallace On 2012-12-01 16:19:59

Answer

Hi there,

This shower shouldn't need a seal as it is an enclosed cabin already. Also, it wouldn't be advisable to attempt to fit any extra items into this unit such as an extractor fan. Please contact our team on 0844 484 7678 if you require anymroe information.

By Mike B On 2012-12-01 16:29:58

Question

Can this be connected to a combi boiler system or does it require a separate hot water system?

By D Woods On 2013-03-28 10:51:45

Answer

Hi there

This item would be suitable to connect to a combi system, so longs there is a minimum pressure of 1.5 bar.

By Anthony On 2013-03-02 12:08:21

Question

Hi, I have a Worcester/Bosch Greenstar 28i Junior Combi boiler. It's rated at 11.4litres/min output. The gauge inside the cover sits at 1.5bar and when operated it goes to 1.0bar. Being a layman, could I ask if this is compatible with this shower cubicle.

By Jim Grimmond On 2013-04-09 13:26:43

Answer

Hi

Thanks for your enquiry. This item requires a minimum of 1.5bar pressure to operate.

By Darren Stevens On 2013-03-05 11:19:36

Question

Can you please tell me if this aqualine shower can be used with a combi boiler or is it an electric shower? 

By Lesley Eyre On 2013-04-21 11:15:27

Answer

Hi There

Thanks for your query. A combination boiler with at least 1.5bar minimum is needed to operate this shower cabin.

By Mike B On 2013-03-05 11:20:17

Question

In the roof section there is the main overhead shower and it looks like vents. Is this an extractor?

By Steve On 2013-05-18 07:29:52

Answer

You are correct in your assumption, it is the extractor.

By Paul Roose On 2013-05-18 09:57:37

Question

What is the maximum door opening of the Aqualine Hydromassage Shower Cabin with 6 Body Jets? 

By Mahmoud Ali On 2013-07-22 11:20:54

Answer

The door opening is 480mm.

By Mike B On 2013-07-26 13:59:19

Question

Is this shower electric?

By Jim On 2013-08-02 15:13:15

Answer

Hi there.

 

Thanks for your question, the shower is not of the electric variety, it would be fed from your boiler and requires a minimum water pressure of 1.5 bar.

By On 0000-00-00 00:00:00

Question

Doe the product come with a full assembly and installation guide please. Thanks

By Hannah Green On 2013-08-17 20:12:37

Answer

Hi there,

 

Yes, a full set of instructions are provided for this product and we also have a video on the website for which you can refer to for installation.

By On 0000-00-00 00:00:00

Question

I'm interested in ths shower cabin but with the jets coming off the same water feed can you realistically get reasonable pressure from an average mains supply?

By toby On 2013-08-29 10:38:23

Answer

Hi there,

This shower cabin requires a minimum pressure of 1.5 bar to function, and the greater the pressure from that point the better your flow rate will be.

I would advise speaking to a qualified plumber to determine whether your mains pressure will be enough for this shower cabin to work, from the minimum pressure provided.

By Clive Walker On 2013-08-29 10:38:23

Question

Is the shower cabin self sealing or do you need to use sealant when constructing?

By rob palmer On 2013-10-18 19:14:32

Answer

Hi there, we would advise using extra sealant to ensure the enclosure is fully sealed.

By Clive Walker On 2013-10-18 19:14:32

Question

Hi, what diameter and length is the shower base waste pipe,and can an additional flexi length be used to get around an awkward bend?

By Jeff On 2013-11-07 07:10:57

Answer

Hi, the diameter is an inch and a half and the length of the hose is adjustable between 0.5 and 0.75m approx. An additional hose can be fitted if you require extra length.

By John Smith On 2013-11-07 12:30:35

Question

Hi just looking at this unit. As panels are used to construct this item is it therefore leak proof? Looks fantastic but how can I be sure where the panels are joined that it won't leak . One of the posts on your web says use silicone. Why ?would you need too ?. It's a fantastic product and a great price but I wouldn't want it to leak

By David Bruce On 2013-12-19 00:00:00

Answer

Hi there we can delay the delivery for a max of 14 working days if you give us a call on the sales line we can run through these options with you.

By Product Question On

Question

Looking to purchase this item. Can you tell me is there a need to use silicone when you join the panels together with the factory's nuts and bolts ? Are these units prone to leak ? 46894424

By David Bruce On 2013-12-22 00:00:00

Answer

Hi, you can use silicone, however it is not necessary as part of the building process. King regards

By Product Question On 2014-01-14 00:00:00

Question

In the roof section there is the main overhead shower and it looks like vents. Is this an extractor? If so how does this work? Does it need an external vent?

By Kennedy On 2013-12-24 00:00:00

Answer

Hello and thank you for your question. They are air vents. It does not have an extractor fan. Regards.

By Product Question On 2014-01-09 00:00:00

Question

aqualine hydromassage shower...could you please inform me as to the clearance required under the tray regarding the waste pipe as my floor is concrete

By geoff mason On 2013-12-27 00:00:00

Answer

Hello and thank you for your question. It is a slim tray so it would not suit a concrete floor. regards

By Product Question On 2014-01-09 00:00:00

Question

hello do I need a pump for this unit ? thanks

By donna little On 2013-12-29 00:00:00

Answer

Hi, Thanks for your enquiry. It will depend on what water system you have. If you have a combination boiler then you'll not need a pump.

By Product Question On 2014-01-06 00:00:00

Question

Is it possible to get an electric shower with the cubicle?

By Jill Sharp On 2013-12-29 00:00:00

Answer

Hi, Thanks for you question. We wouldn't recommend putting a shower in this cabin as you will have to cut the back of it to accommodate your pipework which will invalidate your warranty as it's not designed to house a shower.

By Product Question On

Question

Two questions: How do you attach/install safety handrails inside the enclosure? My floor to ceiling height is 2100mm, will this fit given that I can take extractor ducts out through the ceiling above?

By Martin On 2013-12-31 00:00:00

Answer

Hi, Thanks for you question. Yes this item will fit the space you have however we wouldn't recommend you fit grab rails to the inside as this will invalidate your warranty on this item.

By Product Question On

Question

Hi there Im wondering what the height is between the tray and the top of the side of the shower. Basically, Im 6ft 4, am i too tall??

By Karl Gerrish On 2014-01-21 00:00:00

Answer

Hi, Thanks for your question. The height is 2020mm. Kind Regards

By Product Question On 2014-01-22 00:00:00

Question

I'm just wondering is everything you need in this package ? If there's anything I need to buy would you be able to tell me please

By Emma On 2014-01-27 00:00:00

Answer

Thank you for your question. Everything you need for the shower is included to build the cabin all you would need to purchase separate is the waste fittings which your plumber would supply.

By Product Question On 2014-01-28 00:00:00

Question

Can you install shower & if so. How much for fitting it?

By leeanneflanagan On 2014-01-31 00:00:00

Answer

Hi there, I am afraid we do not have an installation service, we only supply the products. Regards

By Product Question On

Question

What is the internal dimension from the floor to the ceiling please? I am 188cm tall, would I be able to use it? Thank you

By Eric On 2014-02-02 00:00:00

Answer

By Product Question On

Question

Hi Just purchased this item from yourselves, fitted it in and then decided to test it.There was a faulty main hose that leaked but i did'nt find out till it cascaded though my kitchen ceiling.Thats another story. My question is,after removingand refiting,is that i cannot get hot water through.It is red hot in the immediate pipework and is i turn the bottom dial to the right the cold water comes out fine but if i turn the dial back to the scentre an carry on left there is no water coming out from any of the heads or jets.I dont have a combi boiler and the cold water pressure is fine.

By JOHN MCLOUGHLIN On 2014-02-05 00:00:00

Answer

Hi, Thanks for your query. Please call our customer services team on 0844 484 7678 and one of our agents will be able to assist you.

By Product Question On 2014-02-05 00:00:00

Question

Exactly what fittings do I need to connect/install? Thankyou

By Jane Barnes On 2014-02-06 00:00:00

Answer

Hi, thank you for your question, The connections that come out the back of the cabin are 15mm flexible connectors which need to be attached to your hot and cold feeds.

By Product Question On 2014-02-06 00:00:00

Question

I have decided that this is the product I want to buy to replace one bought from Victoria Plumb by previous occupants that I cannot get a replacement thermostatic cartridge for and so have to scrap. To ensure that this dioes not happen again I would like to buy this spare part when I purchase the unit. Can you supply the spare part and how much will it cost, or can you give me the reference number and supplier so I can get it from them Thank you

By Beverley Baxendine On 2014-02-14 00:00:00

Answer

Hello. If you are looking to place an order please call our sales team on 0844 484 7678. Regards.

By Product Question On 2014-02-15 00:00:00

Question

Can the cabin be fixed to the wall? Should it be fixed to the wall? Does it come with wall fixings? Can adjustments be made if walls are 100% true? Will it work with a combi boiler? Thx

By Les On 2014-02-19 00:00:00

Answer

Hello. The unit will be free standing. It is designed to be used with systems that run at over 1.5bar so a combi boiler system is advisable. As it is a cabin it is not adjustable.

By Product Question On 2014-02-20 00:00:00

Question

is the 900 x 900 inside our outside dimensions also is it possible to view this my post code is cm18 7ds harlow essex

By brian simkiss On 2014-02-21 00:00:00

Answer

yes you can view the product we have 4 showrooms Manchester Wigan Warrington and leicester

By Product Question On 2014-02-24 00:00:00

Question

can you confirm what the tray is made of please, as you have said before its made of stone resin, but your description is acrylic.

By patc On 2014-02-25 00:00:00

Answer

Hi, Thank you for your question. The tray on this particular shower cabin is made from acrylic.

By Product Question On 2014-02-27 00:00:00

Question

Can you confirm it will work with a Biasi m96.32sm/c2 combi boiler please?

By N Kumar On 2017-08-04 07:58:20

Answer

Hi, this is fine with that combi boiler. Thanks, Nathan.

By Nathan On 2017-08-04 13:33:54

Question

Hi, I have a baxi boiler....cold water tank in attic and hot water tank in airing cupboard. Is this shower compatible with this system?

By Michelle On 2017-08-31 20:16:24

Answer

Hi Michelle, as long as you have 1.5 Bar pressure, this product will work. Thanks, Chris.

By Chris On 2017-08-31 20:24:10

Question

Are the back panels see through?

By Iain On 2017-10-28 20:49:53

Answer

Hi Iain, no they aren't. Thanks, Nathan.

By Nathan On 2017-10-29 16:41:52