Product Information
Cirque Waterfall Basin Mixer and Bath Filler Tap Pack
Summary
A very unique waterfall basin mixer and bath filler set which incorporates intricate design and a stunning finish. Made from solid brass with ceramic disc technology. 
View This Product's Installation Instructions View This Product's Installation Instructions
Features
Basin Mixer
- Height: 152mm
- Width: TBC
- Depth: 125mm
- Tap Type: Basin Mixer
- Style: Modern
- Minimum Pressure: 0.5bar
- Flow Rate (0.2bar) 6.1 litres/min
- Flow Rate (1.0bar) 9.7 litres/min
- Flow Rate (2.0bar) 15.6 litres/min
- Weight: 0.93Kg
- Materials Specification: Solid Brass
- Finish: Chrome
- Features: Ceramic Disc Technology
- Excludes: Waste
- Suitable for:
- Combination Boilers
- Pressurised Systems
- Pumped Systems
- Gravity Fed Systems (which may require a pump)
- Subject to a minimum pressure of 0.5 bar
Bath Filler
- Height: 145mm
- Width: 210mm
- Depth: 140mm
- Tap Type: Bath Filler
- Style: Modern
- Minimum Operating Pressure: 1.0bar
- Weight: 2.14Kg
- Materials Specification: Solid Brass
- Finish: Chrome
- Features: Ceramic Disc Technology
- Excludes: Waste (see additional items)
- Suitable for:
- Combination Boilers
- Pressurised Systems
- Pumped Systems
- Gravity Fed Systems (which may require a pump)
- Subject to a minimum operating pressure of 1.0 bar
Item Code:
BeBa_10548
Please Note: All sizes are approximate and should be used for guidance only.
Question from Lindy: Asked on 17/04/2016 Can these taps be used with a combi boiler please.
Answer from Benjamin Linnert Good afternoon,
Thank you for you question.
These taps are suitable to be used with a combi boiler as long as you have a minimum pressure of 0.5 bar.
Kind regards.
Question from Gary: Asked on 06/02/2016 Are these suitable for Gravity fed systems
Answer from Anthony Hi,
Thank you for your question.
These taps are suitable for Gravity Fed Systems, but this is subject to a minimum pressure of 0.5 bar. If you do not have this pressure then you may require a pump.
Kind Regards
Question from Phlip Taylor: Asked on 15/07/2015 We have had these installed in a new bathroom back in March this year. We are having some work done on the boiler/new kitchen and I think the 'gauze/mesh\' where the water flows out may have some dirt in. The instructions don't mention this - can they be removed and cleaned without taking the taps off?
Answer from Matt Clarke Hi,
My best advice for you would be to contact out technical team on 01925 544 861 option 2.
Regards
Matt
Question from Gail : Asked on 07/02/2015 Would this pack be suitable for the tabor straight bath and the aspen vanity unit and basin
Answer from Matt Clarke Hi,
Yes this tap pack would be fine to use for that application.
Regards
Question from Naomi: Asked on 06/04/2014 Hi, can I have the mono basin installed for a bath? Have a p shape shower bath and wanted a mono tap in the corner rather than a double tap at the end. Would the mono basin one be sufficient? Thanks?
Answer from Nathan McGregor Hello.
We Don't stock a single tap for baths I am afraid. All of our bath taps are double.
Regards.
Question from Neil: Asked on 03/03/2014 i will soon be purchasing from yourselves a whirlpool bath and vanity sink and toilet unit built in, Just wondered if these taps could be used for both the bath and sink?
Answer from Andrea Bullen Hi,
Thanks for your question. Yes you can use both of these taps. The single mono on the sink and the filler tap for the bath.