Product Information
S9 Single Lever Extended Basin Mixer Tap
Summary
S9 Extended single lever basin mixer with tall base and chrome finish. From the S9 taps collection.
View This Product's Installation Instructions
Features
- Height: 300mm
- Width: 52mm
- Depth: 145mm
- Basin mixer tap
- Extended base
- Lever handle
- Requires 1 tap hole when fitting
- Manufactured from Solid Brass with a Chrome Finish
- Suitable for low OR high pressure systems
- Does not include basin waste
- Suitable for the following Water Systems:
- Combination Boilers
- Pressurised Systems
- Pumped Systems
- Gravity Fed Systems
- Subject to a minimum pressure of 0.5 bar
Item Code:
BeBa_14788
Please Note: All sizes are approximate and should be used for guidance only.
Question from Andy Judd: Asked on 11/06/2014 I will be fitting this onto a marble work top and need to know what diameter hole is required for the tails, ie what diameter hole needs to be drilled through the marble?
Answer from Shaun Ferguson Hi Andy,
The size of the inlets for this product are 15mm, so the hole size that needs to be drilled is 15mm.
Many thanks,
Shaun
Question from Chris: Asked on 21/05/2014 The tap is noisy when water comes through it, is this normal or does mine have a fault?
Answer from Nathan McGregor Hello.
Sorry to hear your having an issue with your tap. If you contact our customer support team on 0844 484 7678 (option 2) and a member of the team will be able to assist.
Regards.
Question from Mark compton: Asked on 15/01/2014 Hi does the tap come with tails
Answer from Peter Hello there.
Yes it comes with the flex pipe to connect to your mains.
Regards.