Product Information
Trembor Luxury Thermostatic Shower Tower Panel
Summary
Luxury Shower Panels at affordable prices, the Trembor Luxury Thermostatic Shower Tower Panel with Body Jets is a beautiful adornment for your bathroom and will allow you to capture the best of your showering experiences. The beautiful panel is adorned in Stainless Steel with defined curves, and an attractive interface. The interface is simple and elegant, with with silicone body jets, a beautiful ABS Hand Shower and brass double lock shower hose. This shower panel is the ultimate touch of luxury which can be added to your bathroom to bring that boutique ambience in your home. The body jets will provide you with soothing pulses of water accompanied with the incorporated shower and handsets will provide you with all the answers to your showering needs. Endorsed by its Thermostatic Mixer for optimum user control, this shower panel is a luxurious must have for your bathroom and shower cabins.
Features
- Panel Height: 1300mm
- Panel Width: 150mm
- Projection: 578mm
- Built In Shower Panel
- Minimum 2.0 bar pressure required (flow rate of 6.8 litres per minute)
- Maximum 5.0 bar pressure required (flow rate of 12.3 litres per minute)
- Materials: Solid Brass/Stainless Steel
- Finish: Chrome
- Shower Hose Length: 1.5m
- Valve Type: Thermostatic
- Weight: 1.2kg
- Controls: Separate temperature and flow controls
- Features:
- Thermostatic Shower Mixer
- Vernut Cartridge - Suitable for:
- Combination Boilers
- Pressurised Systems
- Pumped Systems
- Gravity Fed Systems (Pump is required)
- Subject to a recommended pressure of 2.0 bar
Item Code:
BeBa_15024
Back to top
Question from Paul Round: Asked on 29/11/2019 Hi is this shower needed to have an electrical power connection or does it run straight from the hot and cold water inlets.
Many thanks
Paul
Answer from Catherine Hello,
This is a thermostatic Shower so requires no electrical connection and will run off your hot and cold water inlets.
Thanks
Question from Margaret Dudgeon: Asked on 05/02/2018 Would this shower be compatible with the Aquafloe 1200 x800 quadrant shower cubicle?
Answer from Peter Hi,
Thank you for you question.
Yes this shower would work well in that enclosure.
If you are looking to place an order or have any further questions please call the Manchester showroom on 0161 667 6560.
Thank you
Question from sonia stainer: Asked on 30/04/2016 Is this shower head suitable for hard water areas - ie can it be removed and cleaned easily? Also are the jets powerful and not like the rain shower? Many thanks
Answer from Matt Clarke Hi,
Thank you for your question.
The shower would be suitable for hard water areas. Once the shower is installed you would obly need to clean the facure of the product so it would not need to be un-installed. In regards to the power this is dependant on your own pressure from the boiler.
If you need any more info or would like to place an order, please contact me using the details below.
Kind Regards,
Matt Clarke
Manchester Showroom Assistant Manager
Better Bathrooms Manchester
Telephone: 0161 667 6560
Email: matt.clarke@betterbathrooms.com
Website: www.betterbathrooms.com
Question from Maggie: Asked on 04/02/2016 Can you tell me if the jets work at the same time as the main top shower Please?
Answer from Benjamin Linnert Good afternoon,
Thank you for your question.
Theoretically speaking you could have them operate at the same time, however you would need an overwhelmingly strong pressure to both have sustained use simultaneously.
It is very rare to see a water system that can operate both efficiently.
Kind regards.
Question from Ashvin Mistry: Asked on 30/09/2015 Can you tell whether the water force can be adjusted from any of the shower heads via the controls.
Answer from Nathan Dunstan Hi,
Thank you for your question,
The shower panel is set at one power , you can't control the power on this item .
If you need any more help please call me on 0161 667 6560
Many thanks
Nathan Dunstan
Question from Julie Fish: Asked on 05/08/2015 Can this shower panel be used over a bath or is it only for use in an enclosure?
Answer from Peter Hi there is no reason why you couldn't use this shower over a bath, however you would have an issue using the body jets as the water would just spray out of the end of the bath.
If you require any more information just contact me directly on 0161 667 6560
Simon
Manchester Showroom
Question from Trev: Asked on 06/04/2015 What are the fitting instructions for the product?
Answer from Jamie Hi,
Thank you for your question you would need to speak to our customer service team and they will be able to email you a copy of the instructions there number is 01925 544 861
Question from Pam brereton: Asked on 25/10/2014 Can anyone let me know how to attach the trembor shower to the wall. I expected it to go flush against the tiled wall but I can't see how this can happen as the back of the shower panel is huge and the website offers no insight into this.
Thanks, pam
Answer from Nathan McGregor Hello.
Thank you for you question.
There are usually instructions provided with this. If you have not recived them please call our technical team on 0844 484 7678 (Option 2).
Regards.